Low melt extruding material, with good stress cracking resistance mainly used for insulation and jacket of wire & cable, film and thin walled tube.

Technical Index:Technical index:

Recommended processing conditions:

Extruding Machine L/D: 25:1-30:1

Screw Compression ratio: 3:1

Equilibrium Ratio (DDR):15-35

DRB: 0.95-1.05

Extrusion Speed:20-40m/min

It is corrosive to most metals, and anti-corrosion materials are suggested for the extruding machines,such as:HAC-276

Package: It is semi-transparent solid resins packed in PE bag and put in paper drum or in double-layer reinforced plastic bag, net wt. 25kgs/package.

Storage: Stored in clean, cool and dry places; avoid direct sunlight, moisture and dust.