Low melt extruding material, with good stress cracking resistance, mainly used for tubing, film, insulation and jacket of wire & cable.

Technical index:

Recommended processing conditions:

Extruding Machine L/D: 25:1-30:1

Screw Compression ratio: 3:1

Equilibrium Ratio (DDR):7-15

DRB: 0.95-1.03

Extrusion Speed:10-20m/min

It is corrosive to most metals, and anti-corrosion materials are suggested for the extruding machines,such as:HAC-276

Package:It is semi-transparent solid resins packed in PE bag and put in paper drum or in double-layer reinforced plastic bag, net wt. 25kgs/package.

Storage:Stored in clean, cool and dry places; avoid direct sunlight, moisture and dust.